- Hard Reboot iPhone/iPad
- Restart Router to Fix iPhone/iPad Not Activated
- Wait for a While & Try Again
- Check Apple System Status
- Contact Your Carrier
- Step 1 – download, install & launch the software
- Step 2 – put your device in dfu/recovery mode
- Step 3 – download firmware
- Step 4 – solve unsuccessful iphone activation problem
- Way 5. fix ipad activation error with ultfone ios system repair -100% success
Hard Reboot iPhone/iPad
This is a well-known fact that most issues after upgrading to iOS 14/13 can be resolved just by performing a hard reboot. Try it once and check if it proves beneficial in your case or still could not activate the iPad or iPhone. Here’s how to do a hard reboot it:
- On an iPhone 7 or 7 Plus, hold down the Volume Down button and Sleep/Wake button at the same time, or Home and Sleep/Wake button if you own iPhone 6 or earlier, for no less than 8-10 seconds. Let go of the buttons, as soon as you see Apple Logo is appearing on the screen.
- If you are using iPhone 12/11/X/8, the steps are different. You need to press Volume Up and Volume Down buttons, and then keep holding the Sleep/Wake button until you see the Apple logo.
Restart Router to Fix iPhone/iPad Not Activated
Sometimes, an unstable WiFi connection can also make this issue to come up. You can try with another device to see if there is an issue with your network. If the network is not active, you need to check your WiFi router. Restarting your WiFi router would clear some sort of instability with the connection. Simply plug out the power cord of the router, wait for 5-10 seconds and plug it back in.
Wait for a While & Try Again
If you’ve experienced the activation error for the first time, wait for a while and then try again! Apple servers are probably pretty much busy handling a large volume of traffic which, in turn, ain’t letting the activation to go through. While waiting, remove the SIM card, plug it back in after few minutes and try again.
Check Apple System Status
Sometimes when the activation server is under maintenance, you will not be able to activate your iPhone successfully. You can go to Apple System Status and check if the iOS Device Activation option is coming with a red or yellow circle. If it is, then wait until the circle turns green and then try again.
Contact Your Carrier
If in case, none of the solutions works, it is recommended to contact your carrier then. Maybe the problem could be because of the SIM card if you’re activating a locked iOS device with a different carrier, you’ll certainly get this error.
Step 1 – download, install & launch the software
Launch the software after installing it on your computer. iMyFone Fixppo’s home-screen will come up. Now, tap on the option that says «Standard Mode» out of the options available. Then connect your iPhone and computer.
Step 2 – put your device in dfu/recovery mode
Now, you have to reboot your iOS device into DFU/Recovery Mode to proceed to fix up your issues. Follow the instructions provide on the screen and the program will automatically identify your device.
Step 3 – download firmware
Moving forward, the next step is getting all firmware versions suitable for your iOS device. Just choose the version you like and click the «Download» button.
Step 4 – solve unsuccessful iphone activation problem
The final step is to hit on the «Start» button. Then the program will start to locate the iOS problem of your device and solve your problem in the device. On completion, start your iPhone/iPad/iPod touch and check if you are able to activate your device or not.
Way 5. fix ipad activation error with ultfone ios system repair -100% success
Even after trying all above basic troubleshooting tips above, you still have the problem iPad won’t activate after restore or update? Worse still, your iPad gets stuck on activation screen and cannot get past? Your newly installed iOS may have something wrong and cause the activation error.
In this situation, iOS System Repair can easily fix iPad activation error by repairing the corrupted operating system. This system repair software can fix over 50 types of iPad problems without data loss, including iPad won’t turn on black screen, iPad screen not rotating, iPad keeps restarting, and so forth.
Install this iPad repair software on to your PC or Mac, and use it to fix iPad activation error now.
Run UltFone iOS System Repair and connect your iPad with the computer. Select «Repair Operating System» on the main interface.
In the next screen, click «Fix Now» button.
Prior to system repari, you’ll need to click «Download» button to start downloading the firmware package. This program will install the latest iOS to your device.
After downloading. Click «Start Repair» to start repairing system and fixing iPad can’t activate.
The process will take a few minutes. After the system repair, you’ll find that your iPad is back to normal. You can activate it without any problem now.
Here’s a video to show you how to repair iOS to fix iPhone, iPad problems.